CISCO CCIE Network
July 22, 2012 Leave a comment
In EIGRP one of the options under the stub configuration command is receive-only. This is similar to RIP and passive interface where one side receive routes and doesn’t send any.
Configuration
1) Under the EIGRP process
R1(config)#router ei 100
R1(config-router)#eigrp stub receive-only
R1 receives routes but doesn’t send any to it’s neighbours.
Hello, and welcome to the first post of my CCIE blog
This blog has got one simple goal and that is to improve our skills in Cisco Networking field so we can become best engineers on a job market.
Wordpress Blog https://ccie4all.wordpress.com/ information about the changes made to Gns3 BGP , MPLS and R&S CCIE labs.
In order to access and download all provided materials and receive important updates from Gns3 BGP , MPLS and R&S CCIE labs under GNS3 tab in the main header please go ahead and subscribe to https://ccie4all.wordpress.com/ !
All other posts have not been affected and can be accessed at any given time.
Enjoy !
Tom
Tom G CCIE Blog 
Recent Comments