IPv6 NAT PT


Steps to Configure NAT PT

Step 1) Turn IPv6 Nat on the interfaces

R2(config-if)#int f0/0
R2(config-if)#ipv6 nat
R2(config-if)#int f0/1
R2(config-if)#ipv6 nat

Step 2) Create a NAT prefix and advertise to the routers in the IPv6 area

R2(config)#ipv6 nat prefix 14::1/96
R2(config)#ipv6 router os 1
R2(config-rtr)#redistribute connected

Step 3) Create the mapping from v4 to v6 and v6 to v4

R2(config)#ipv6 nat v6v4 source 12::1 10.1.13.1
R2(config)#ipv6 nat v4v6 source 10.1.13.3 14::3

Test by pinging

R1(config-rtr)#do ping 14::3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 14::3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/8/8 ms

Advertisements

About ccie4all
Hello, and welcome to the first post of my CCIE blog This blog has got one simple goal and that is to improve our skills in Cisco Networking field so we can become best engineers on a job market. Wordpress Blog https://ccie4all.wordpress.com/ information about the changes made to Gns3 BGP , MPLS and R&S CCIE labs. In order to access and download all provided materials and receive important updates from Gns3 BGP , MPLS and R&S CCIE labs under GNS3 tab in the main header please go ahead and subscribe to https://ccie4all.wordpress.com/ ! All other posts have not been affected and can be accessed at any given time. Enjoy ! Tom

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: